Keep your gutters draining longer between cleanings with the Spring Gutter Strainer®.
The Spring Gutter Strainer® has an innovative spring coil design made from only one piece of wire, allowing no chance of failure of any parts. The wire is almost twice as thick as other wire strainers on the market today and the long flexible neck design ensures the product stays in the downspout even if a leaf blower is used to clean the gutters.
The head of the Spring Gutter Strainer® is also taller and wider than the competition, proven to keep gutters draining longer between gutter cleanings.
Choose the Spring Gutter Strainer® that is right for your gutter system in two easy steps!
Step 1: Size
Choose the 2-inch Spring Gutter Strainer® if the following applies:
You have 5-inch half-round gutters or 5-inch k-style gutters...

(Top view of 5" half-round gutter shown)

(Top view of 5" k-style gutter shown)
...and the usual downspout pipes are as follows:

(Side view of 5" half-round gutter and 3"round downspout)

(Side view of 5" k-style gutter and 2"x3" rectangular downspout)

(Front view of 5" k-style gutter and 2"x3" rectangular downspout)
While the size of the gutter matters, the size of the outlet hole leading into the downspout is more important. If it is 3-inch round in diameter or 2" x 3" oval/rectangular you will need the smaller 2-inch size Spring Gutter Strainer®.
Choose the 3-inch Spring Gutter Strainer® if the following applies:
You have 6-inch half-round gutters or 6-inch k-style gutters...

(Top view of 6" half-round gutter shown)

(Top view of 6" k-style gutter shown)
...and the usual downspout pipes are as follows:

(Side view of 6" half-round gutter and 4" round downspout)

(Side view of 6" k-style gutter and 3"x4" rectangular downspout)

(Front view of 6" k-style gutter and 3"x4" rectangular downspout)
Again, while the size of the gutter matters, the size of the outlet hole leading into the downspout is more important. If it is 4-inch round in diameter or 3" x 4" oval/rectangular you will need the larger 3-inch size Spring Gutter Strainer®.
There are a couple of exceptions!
For best fit:
- If you have 5" gutters and larger (3x4" rectangular or 4" round) downspout pipes, please choose the smaller, 2" Spring Gutter Strainer®
- If you have 6" gutters and smaller (2x3" rectangular or 3" round) downspout pipes, please also choose the smaller, 2" Spring Gutter Strainer®
Step 2: Type of Material
Galvanized or stainless steel:Your Satisfaction is guaranteed!
If you have any concerns about your choice, pick the stainless steel Spring Gutter Strainer®. It is still a low cost solution and will last forever with no risk of galvanic corrosion, no matter what your gutters are made of. Even if you make a mistake on the size or material, you can always return it in its original packaging and reorder the other item, it's that easy!